SKYLIGHTS
The NEW generation VELUX Sun Tunnel has been redesigned from the ground up with a wide range of improvements that make installation faster and easier. Tube assembly time is reduced and less time is spent in the roof cavity.
The VELUX flexible Sun Tunnels provide installation flexibility. Flexible Sun Tunnels can be used when obstructions in the roof cavity prevent the use of rigid Sun Tunnels. Sun Tunnels are ideal for hallways, walk-in robes, pantries, toilets and other small areas without natural light.
Product Features:
Flexible tunnels are recommended when installation around obstacles within the roof space is required. They are the easiest product to install because of the maneuverability of the material.
- Excellent for ease and speed of installation
- Easily bends around attic obstructions
- Ideal for shorter tunnel lengths
- Standard tunnel length of 2.2m provided
Flexible Sun Tunnel
Product Features:
Flexible tunnels are recommended when installation around obstacles within the roof space is required. They are the easiest product to install because of the maneuverability of the material.
- Excellent for ease and speed of installation
- Easily bends around attic obstructions
- Ideal for shorter tunnel lengths
- Standard tunnel length of 2.2m provided
Certification
to be provided.
Skylights should be inspected at least once per year and any build-up of leaves and rubbish be removed from around the skylight. Depending on the severity of the problem, this may be needed to be performed more often.
The Sun Tunnel is normally cleaned by the elements. At least once per year, wipe over with soap and water and a nonabrasive sponge. Avoid using solvents and thinners. Dust and wipe over to ensure that any build up or caked dust is removed which could prematurely cause corrosion. Repeat as often as needed for each individual location.
350mm
Less Time in Attic
Flexible Shaft makes the installation fast and easy.
Easy to Install & Clean
The VELUX Sun Tunnel is easier to install thanks to the threaded diffuser. When you’re finished, simply screw the diffuser into place. And, as an added bonus, it’s easier to clean as it can be unscrewed and cleaned as needed.
Low Roof Profile
The outer frame has the appearance of a traditional skylight and sits flush with the roof for harmonious effect. 4mm toughened glass adds strength without the need for a bulging bubble.