Skyspan Circular Skylight
Skyspan Circular Skylight utilizes nature by bringing natural light into your home or work place along with providing an aesthetic circular design to any building.
The Skyspan Circular skylight is the ultimate choice when it comes to Utilizing Nature’s Gift of natural lighting in your home. The Skyspan Circular skylight provides an aesthetic design to any building, creating an atmosphere of elegance and design. Rooms are provided with natural light away from the exterior walls, in cost and energy efficiency. Skyspan’s Circular skylights fit all types of roof profiles.
The complete unit is manufactured from Zincalume steel for durability and is designed for economy and easy installation. The Skyspan Circular Skylight can be supplied in a range of materials including aluminium, stainless steel and copper. The standard dome is formed from 3mm clear acrylic and 4.5mm clear acrylic for larger sizes. There are no fixings through the glazing to allow for thermal cycling. Tint and opal domes are also available.
The circular skylight can also be manufactured in polycarbonate. The standard dome is formed from 3mm acrylic and 4.5mm for larger sizes. There are no fixings through the glazing to allow for thermal cycling. Tint and clear domes are also available.
The Skyspan Circular skylight is manufactured to comply with the Australian Standard AS4285 and is covered by a seven (7) year guarantee.
The Skyspan skylight can be manufactured to cater for your individual needs and come with a large range of options.
|600mm Diameter||1500mm Diameter|
|800mm Diameter||1800mm Diameter|
|900mm Diameter||2000mm Diamete|
|1000mm Diameter||2200mm Diameter|
|1100mm Diameter||2400mm Diameter|
Skylights should be inspected at least once per year and any build up of leaves and rubbish be removed from around the skylight. Depending on the severity of the problem, this may be needed to be performed more often.
The Skyspan skylight is normally cleaned by the elements. At least once per year, wipe over with soap and water and a nonabrasive sponge. Avoid using solvents and thinners. Dust and wipe over to ensure that any build up or caked dust is removed which could prematurely cause corrosion. Repeat as often as needed for each individual location.
10 - 15 Working Days